Loading contract…
BETAThis is a new independent transparency project, not an official government website. The data is sourced from public registers and may contain errors, so always verify against the official source. If you find a problem, please report it here.
The design and manufacture of a Fourier Transform Infrared (FTIR) Spectroscopy System.
High level functional requirements as per below:
1. The FTIR equipment shall be capable of measuring the corrosion thickness on samples up to 10 µm.
2. The FTIR rig shall be operated remotely.
3. The FTIR equipment shall be capable of being operated in conjunction with an XY table, allowing the complete area of the sample to pass over the FTIR sampling area.
4. The probe head of the FTIR equipment must protrude from the end of the spiral wall plug to which it is fitted in order to allow the sample to be presented up to the probe with a clearance of 0.4mm +/- 0.1mm.
5. The probe head of the FTIR equipment shall be protected from damage that samples being pushed against it could cause.
6. The FTIR equipment shall include a desktop computer and software to support the analysis and display the results from the FTIR equipment.
7. The FTIR equipment shall be designed to withstand the in-cell environment.
Preliminary market engagement notice (UK2). The buyer wants to talk to suppliers before designing the procurement. Taking part is how to shape it.
Bids are submitted through the buyer’s own portal, not on this site. Read the full notice on Find a Tender before relying on any date here.
No supplier information available.
This procurement was divided into 1 lots, each awarded separately.
| Lot | Value | Status |
|---|---|---|
| Lot 1 Jan 2026 – Oct 2026 | - | planning |